Efficient, oil-less direct-drive dual–discharge pumps produce greater flow pressure, so each can serve two water features simultaneously. Installed either vertically or horizontally, the corrosion-resistant submersible body is designed for non-potable, continuous operation. Pumps are all cULus certified, 115 volt operation and have 16’ power cords.
Unique dual-discharge design allows for operation of two water features simultaneously.
Powerful direct-drive pump produces greater starting torque and flow pressure than comparable magnetic drive submersible pumps.
Corrosion-resistant body designed for non-potable submersible use.
Models 566409 includes two 1-1/4" MNPT x 1" barbed elbow adaptor and a 1-1/4" MNPT discharge cap.
Model 566417 and 566407 includes two 1-1/4"MNPT x 11/4" barbed elbow adaptor and a 1-1/4"MNPT discharge cap.
Maximum pumping height of 25'(566409), 29'(566417), 30'(566407).
Little Giants PE Series pond pumps are epoxy filled, compact in design, produces superior water flow and has corrosion resistant plastic housing. Ideal for the water gardening environment. Often used for Fountain and Statuary applications.
Maximum Pumping Height 7’ (566608), 12’ (566611), 13’ (566612).
Dominator® Wastewater and Sewage Pump - The Dominator® submersible pump series from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas.
10SH-CIM
1/2 HP spilt phase, relay start motor with overload protection
Designed for continuous duty
High head model
Epoxy coated cast iron housing and volute
2" FNPT (51 mm) discharge
Carbon/ceramic shaft seal
Upper and lower ball bearings
Multiple switch options for automatic operation
Multiple power cord lengths available
UL/CSA listed
16S-CIM
1 HP permanent split capacitor motor with overload protection (single phase models)
Eliminator® Wastewater and Sewage Pump - The Eliminator® submersible pump series from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas.
8E-CIM
1/3 HP shaded pole motor with overload protection
Designed for continuous duty
Epoxy coated cast iron housing and cover
High impact thermoplastic base
Carbon/ceramic shaft seal
Upper and lower sintered sleeve bearings
Manual Operation (Multiple switch options for automatic operation are available)
25 Foot Power Cord
UL / CSA listed
10E-CIM
1/2 HP split phase motor with overload protection
Designed for continuous duty
Epoxy coated cast iron housing
Carbon/ceramic shaft seal
Upper and lower ball bearings
Manual Operation (Multiple switch options for automatic operation are available)
Introducing our NEW wet rotor canned motor water feature pump. They can be used submersed or externally and can be positioned vertically or horizontally. With NPT threads and SPIG fittings built in, attaching fittings is a breeze. The included prefilter makes these pumps built for flexibility and durability in any decorative water application.
The Little Giant K-Series Pumps have been discontinued by the manufacturer.
Little Giant's K-Series pumps are built for professional installations. Engineered for non-potable submersible use, and designed to handle solids, these pumps feature efficient oil-less motors protected by a stainless steel cylinder. All K-series pumps are cCSAus certified, 115 volt operation and have 16’ power cords.
Little Giant’s uniquely designed automatic pool cover pump is ideal for removing water from all types of pool covers. The APCP-1700 activates in approximately 2" of water and deactivates in approximately 1.5" of water. The pump comes equipped with a low energy consumption, permanent-split capacitor (PSC) motor. The motor is mounted in a sealed, stainless steel housing and cooled by the flow of the pumping fluid over the motor housing. The APCP-1700 has a wide base design for needed stability.
This pump utilizes epoxy coated cast iron or aluminum housings and contain non-toxic dielectric oil, which provides continuous lubrication for maximum motor life.
1200 GPH @ 1' maximum flow rate
1/6 HP thermally protected, shaded pole motor
Epoxy-coated cast aluminum housing
Removes water down to 1/8"
Bottom inlet has removable screen for easy cleaning
1" FNPT outlet includes garden-hose adapter
25 Foot Power Cord
Max Head 26.3 Feet
8.6"H x 4.4"W x 6.1"L
380 watts
6-CIM-R
For residential and light commercial use, the 6-CIM-R sump pump provides efficient and reliable service. Pump features a 1-1/2" discharge with an 18' maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and rapid heat dissipation. Polycarbonate cover and Polypropylene volute-base. Garden hose adapter included for utility use.
1/3 HP shaded pole motor with overload protection
Designed for continuous duty
Epoxy coated cast iron housing
1-1/4" (31.7 mm) adapter and 3/4" (19 mm) garden hose adapter included
Carbon/ceramic shaft seal
Upper and lower sintered sleeve bearings
Manual operation
25 foot power cord
UL / CSA listed
6-CIA
For residential and light commercial use, the 1/3 HP, automatic 6-CIA sump pump provides efficient and reliable service. Pump has a 1-1/2" discharge with an 18' maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and excellent heat dissipation. Polycarbonate cover and polypropylene volute-base.
1/3 HP shaded pole motor with overload protection
Designed for continuous duty
Epoxy coated cast iron housing
1-1/4" (31.7 mm) adapter and 3/4" (19 mm) garden hose adapter available
Little Giant's WGFP series pumps are constructed with stainless steel, cast iron and durable thermoplastic, the new solids-handling submersible Little Giant water feature pumps meet the rigorous demands of the most impressive water features and come with a two year warranty. Pumps are all cCSAus certified, 115 volt operation and have a 19’ power cord.
Submersible Water Feature Pump
Ideal for powering water features and pond filtration systems with flows from 2,300 GPH to 6,400 GPH
Heavy-Duty, Stainless Steel Motor Housing to assist in cooling motor to extend the life of the pump
Clog-Resistant Design capable of passing 1” diameter solids
Continuous Duty Rated for operating in the most rigorous of feature applications
Energy Efficient PSC Motor producing only 320 to 1210 Watts
Professional-Grade Sealing Double Mechanical and Single Radial-Lip Shaft Seals on 1/2 HP, 3/4 HP and 1 HP models. Single Mechanical and Single Radial-Lip on 1/5 and 1/3 HP models.
SKU
Description
Price
Order
566066
WGFP-15 2300 GPH @ 5ft 1/5 HP Solids-Handling Pump
C a l l
C a l l
566067
WGFP-33 2500 GPH @ 5ft 1/3 HP Solids-Handling Pump
C a l l
C a l l
566068
WGFP-50 4280 GPH @ 5ft 1/2 HP Solids-Handling Pump
C a l l
C a l l
566069
WGFP-75 4900 GPH @ 5ft 3/4 HP Solids-Handling Pump
